Bolivar, MO

417-218-8348

St. Louis, MO

314-536-8688

Navajo County · Flagstaff & northern Arizona

Metal buildings in Show Low, AZ.

We supply shops, garages, RV storage, barns and more across Show Low and the White Mountains. Our work reaches from town out to the acreage around it, and anywhere else you’re building.

Roof 4/12 or steeper

30 psf snow

Flatter roofs

35 psf snow

Frost line

18 inches

Building code

2018 edition

What people build in Show Low

Mountain lots and open acreage, with the roof pitch deciding more than people expect.

Shops & garages

Unfinished and under sixty feet wide, tubular steel is usually the answer, insulated or not.

RV & boat storage

Settle the door before the footprint. Every two feet of eave above twelve adds roughly five percent to the frame.

Barns & hay

Barns and hay storage go up on the acreage around town. Red iron takes over past eighty feet.

Barndominiums

Steel truss is the fit. Drywall attaches to the frame, so there’s no second wall to build.

See what a steel building costs for real per-square-foot ranges.

Permitting metal buildings in Show Low

The city’s standards

  • Roof snow is 30 psf at a 4/12 pitch or steeper, and 35 psf below that.
  • Footings go 18 inches below grade, and wind design is 90 mph.

Code editions

  • The city is on the 2018 building codes.
  • When it adopts a new edition, either edition can be used for twelve months, but not mixed in one design.

Fire code

  • Fire code questions go to Timber Mesa Fire & Medical District, (928) 537-5100.

Here the roof pitch sets the snow load. Most metal buildings are pitched below 4/12, so they’re designed to 35 psf. A steeper roof drops it to 30 psf but adds steel and sheeting of its own. We’ll price both and tell you which comes out ahead.

We also serve Pinetop-Lakeside, Snowflake, Taylor and Heber-Overgaard. See Flagstaff & northern Arizona or all of Arizona.

Start with a conversation

Let’s talk about your Show Low project.

Tell us what you’re planning and where you’re building. We’ll help you work out the next steps.

  1. Tell us what and whereSend us the size, how you’ll use the building and the address.
  2. We check the siteWe confirm who permits the address and which code and loads apply.
  3. You get a clear recommendationWe recommend the frame that fits and price it against the alternatives.